Languages | Current version | ||
---|---|---|---|
Privacy Policy | V02 05/2021 | ||
End User License Agreement for Software (EULA) | V04 12/2022 | ||
Open source licenses COMfortel D-400 / D-600 | 2.4B |
Caution: The parameter »cipher« has a changed meaning after the update to OpenVPN 2.6 and is no longer supported. If necessary, adjustments in frequently used configurations are necessary in this regard.
Performing an update
1. Save one of the following update server URLs under: Update > Update server URL.
2. Start the update.
More
You can find more information about the update in the Developer section.
General Information
Important: Support for the xml description for function keys will be discontinued in a future release. Please migrate your function keys to the Lua format.
New Functions
When this function is switched off, incoming and outgoing calls are saved in the Call history.
After picking up the receiver or putting it down, a predefined phone number is called after a predefined time.
If an image has been assigned to a speed dialling key, this picture is also displayed during simplified forwarding in the active call.
Pressing a configured emergency call button on the device sends an alert in the form of a silent notification to other users.
From Release 2.4, the use of USB headsets is supported.
The Voicemail App is now supported for the device variants COMfortel D-400/D-600 in connection with Auerswald PBXs (support for COMtrexx from Release 1.8.0). The app allows you to organise fax messages and voicemails conveniently. Users of a provisioning PBX do not need to enter any credentials. The app is self-provisioning.
The online help can now be accessed and searched directly in the web interface.
Images from the SIP header are displayed for both incoming and outgoing calls.
Improvements
Caution: The parameter »cipher« has a changed meaning after the update to OpenVPN 2.6 and is no longer supported. If necessary, adjustments in frequently used configurations are necessary in this regard.
If the boot process into the updater fails, the reason for the standstill is now displayed.
The administrator can display or hide menu options. The display no longer exclusively affects the phone, but now also affects the user's authorisation level and how menu options are displayed on the web interface.
In the 2nd line of a configured speed dialling key, the stored phone number is now displayed again.
Terms used until nowRepeat subscription/Repeat register modified in Retry subscriptions/Retry register. This makes it clear that these are settings for the event of an error.
During the display of webcam images in standby mode, the switchover to the dialling window takes place automatically while dialling a number; there is no need to press the Home key.
Bug fixes
After the firmware update to version 2.2A, network dropouts occurred due to a problem with the IPv4 configuration (static, DHCP).
Languages | Current version | ||
---|---|---|---|
Quick Guide | V01 12/2019 | ||
Instructions | V02 10/2020 | ||
Privacy Policy | V02 05/2021 | ||
End User License Agreement for Software (EULA) | V04 12/2022 | ||
Advanced Information | V09 11/2022 | Online PDF | |
V09 11/2022 | Online PDF | ||
V09 11/2022 | Online PDF | ||
Open source licenses COMfortel D-400 / D-600 | 2.4B |
Licenses: License path adapted
Note about EN 62368-1 8.7, 8.11 deleted.
2 USB ports: COMfortel ® D-XT20i complemented
A2: COMfortel ® D-XT20i complemented. Bluetooth-Dongle complemented.
General info: Description added
Data Controller: Description added
Data Protection Officer: Description added
LDAP / LDAPS: Description added
CardDAV-CalDAV: Description added
Rights of the person concerned: Description added
General Information
Help/instructions for phones of the COMfortel D-Serie from firmware version 2.4
New descriptions
Contains information on the new firmware version
New function
New function
New function
New function
If a key to which a function has not been assigned is pressed for a longer time (long press), the menu for configuring the selected key opens automatically.
Description and illustration of incoming calls on devices of COMfortel D-Series
Changed descriptions
New entry:Silent Alert
USB headsets added
Icon added for function Silent Alert
Trouble-free operation after provisioning by a cloud PBX
Display of error messages in the event of a failed boot process in the updater
Repeat subscription modified in Retry subscriptions
Repeat register modified in Retry register
Integration of video tutorials on specific topics.
Targeted positioning of links to selected topics in the Dokuwiki.
Removed descriptions
Information on the use of protocols (IPv4/IPv6)
Several editiorial changes
For the following products:
For the following firmware:
Language:
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
Languages | Current version | ||
---|---|---|---|
End User License Agreement for Software (EULA) | V03 05/2021 | ||
Privacy Policy | V02 05/2021 | ||
Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.2B |
The update is carried out via the address https://update.auerswald.de.
This address must be entered on the phone under Menu -> Settings -> Firmware update -> Update server URL.
Further information about the update process can be found in the Auerswald Developer
On the COMfortel D-100/D-200 device types, in some cases the status message displayed during provisioning did not disappear after the process was finished.
Calling up the central caller list led to display problems with partly limited operability of the phone.
After the firmware update to version 2.2A, an incorrect BLF display of the group status occurred. A busy group number was not signalled as busy (lit red).
After multiple logins/logouts to a COMtrexx, names were not correctly updated in the display.
After the firmware update to version 2.2A, there was an incorrect display of the key LED and limited functionality in the speed dialling keys with call numbers to external area.
After the firmware update to version 2.2A, network interruptions occurred due to a problem with the IPv4 configuration (static, DHCP).
Languages | Current version | ||
---|---|---|---|
Quick Guide | V01 12/2019 | ||
Instructions | V02 10/2020 | ||
End User License Agreement for Software (EULA) | V03 05/2021 | ||
Privacy Policy | V02 05/2021 | ||
Advanced Information | V08 05/2022 | Online PDF | |
V08 05/2022 | Online PDF | ||
V08 05/2022 | Online PDF | ||
Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.2B |
Licenses: License path adapted
Note about EN 62368-1 8.7, 8.11 deleted.
2 USB ports: COMfortel ® D-XT20i complemented
A2: COMfortel ® D-XT20i complemented. Bluetooth-Dongle complemented.
Floating user licence replaces Concurrent User License
General info: Description added
Data Controller: Description added
Data Protection Officer: Description added
LDAP / LDAPS: Description added
CardDAV-CalDAV: Description added
Rights of the person concerned: Description added
Help/Instructions for phones of the COMfortel D-Serie from firmware version 2.2
Contains information about the new firmware version
New function
The function key icons can be displayed or hidden on the COMfortel D-XT20(i) key extension modules.
New function
New function
Changed description
New function
Gesture control can be used to switch between two different views.
Extended function
The entries have been added:Bluetooth,Relays,Park position, Status displayflashing yellow/shining yellow.
The entry for the LDAP server's default port has been adjusted.
Note on phone behaviour during an update/backup
New icons:Exchange Line,Group
Example added
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
Languages | Current version | ||
---|---|---|---|
End User License Agreement for Software (EULA) | V03 05/2021 | ||
Privacy Policy | V02 05/2021 | ||
Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.2A |
The update is carried out via the address https://update.auerswald.de.
This address must be entered on the phone under Menu -> Settings -> Firmware update -> Update server URL.
Further information about the update process can be found in the Auerswald Developer
Depending on the scenario, the 2nd line in the label of the speed dialling key contains different information, such as e.g. setup errors, the current call status or name/phone number of the other party if available and much more.
The function key icons can be shown or hidden for COMfortel D-XT20(i) key extension modules: Web interface > Display and LED > Show icons on D-XT20(i)Phone > Settings > Display and LED > Show icons on D-XT20(i)
For a potential service case, information is now displayed as to which network chip was installed in the phone: Web interface > Dashboard > Network chip,Phone > Settings > About phone > Network chip/
If a phone can be reached in the network, an LLDP packet with MED class 3 information is sent when the LLDP function is switched on and after the preset time interval has expired. Can be set in the following places: Web interface > Network > Topology > Basic Network SettingsPhone > Settings > Network > Topology
A call can be parked in a position and resumed using the parking position key.
An example has been added for setting up call bindings on a FRITZ!box.
The LED display of the speed dialling key has been expanded to include the status flashing yellow (establishing a subscription) and glowing yellow (error).
For easy navigation, the list of possible function keys now appears in alphabetical order.
A configured camera can be set as wallpaper for the idle screen. Gesture control can be used to switch between two different views: standard view on the left, view without widgets on the right: Phone > Settings > Display and LED > Camera as wallpaper
Admins have to change the password at the initial login. The old password must no longer be entered.
After an update, the phone may appear usable even though the settings migration is not yet complete. To inform the user of this fact, a blocking message now appears: Data conversion, process can take several minutes.
For the call types Exchange Line and Group a corresponding icon is now displayed.
Access: Menu items can be shown/hidden by the administrator. The display no longer only affects the phone, but also the display of menu items in the web interface for the authorisation level User.
Previously, the image of the ME contact was only displayed on the idle screen if it was encoded according to the Base64 standard. It is now possible to specify an external URL.
So far, the display name, as assigned under identities, was sent with a call. Now a prioritised selection is made:
1. Primary user name (can be provisioned) 2. Display name as assigned under Identities 3. Device name 4. No display if none of the listed information is available
Information on this has been added under Using the Phone > Basic Knowledge > Display > Display overview > Varying display names.
The UI Texts between the different interfaces have been aligned: Web interface > Display and LED,Web interface > Cameras,Web interface > Sound
Only LDAPS is used by default. The specification for the default port of the LDAP server has been adjusted accordingly and an overview of possible ports for various LDAP protocols has been added.
Certain requests (reboot, check-cfg) via Notify were only executed if the request was sent by the registrar and the registrar was saved as an IP address or the IP address was in the SIP provisioning release list. Now requests are also executed if they come from the registrar or outbound proxy, regardless of the saved format.
Languages | Current version | ||
---|---|---|---|
Quick Guide | V01 12/2019 | ||
Instructions | V02 10/2020 | ||
End User License Agreement for Software (EULA) | V03 05/2021 | ||
Privacy Policy | V02 05/2021 | ||
Advanced Information | V08 05/2022 | Online PDF | |
V08 05/2022 | Online PDF | ||
V08 05/2022 | Online PDF | ||
Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.2A |
Licenses: License path adapted
Note about EN 62368-1 8.7, 8.11 deleted.
2 USB ports: COMfortel ® D-XT20i complemented
A2: COMfortel ® D-XT20i complemented. Bluetooth-Dongle complemented.
Floating user licence replaces Concurrent User License
General info: Description added
Data Controller: Description added
Data Protection Officer: Description added
LDAP / LDAPS: Description added
CardDAV-CalDAV: Description added
Rights of the person concerned: Description added
Help/Instructions for phones of the COMfortel D-Serie from firmware version 2.2
Contains information about the new firmware version
New function
The function key icons can be displayed or hidden on the COMfortel D-XT20(i) key extension modules.
New function
New function
Changed description
New function
Gesture control can be used to switch between two different views.
Extended function
The entries have been added:Bluetooth,Relays,Park position, Status displayflashing yellow/shining yellow.
The entry for the LDAP server's default port has been adjusted.
Note on phone behaviour during an update/backup
New icons:Exchange Line,Group
Example added
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
Languages | Current version | ||
---|---|---|---|
End User License Agreement for Software (EULA) | V03 05/2021 | ||
Privacy Policy | V02 05/2021 | ||
Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.0C |
The update is carried out via the address https://update.auerswald.de.
This address must be entered on the phone under Menu -> Settings -> Firmware update -> Update server URL.
Further information about the update process can be found in the Auerswald Developer
A provisioning error caused dropouts in the outgoing audio channel during the call in connection with FW 8.2B-002. Now the error has been resolved.
Device inertia and audio issues were experienced due to memory losses associated with BLF. Now these errors have been resolved.
Pending re-registration attemps due to timing errors in the phone could lead to the error message "503 Broken pipe" after an update or restart of the PBX. The phones now register themselves stably when the Pbx is restarted.
When configuring speed dialling keys via the web interface, the displaying of assigned function keys was briefly interrupted after saving. Now the error has been resolved.
When do-not-disturb was enabled, the LED on the function key did not light up red as excepted after logging into the PBX, but in yellow. Now the error has been resolved.
In the case of function keys for speed dialling an PBX templates, a time set too short for the re-subscribe led to a high load. Now the error is fixed by using the expire time defined in the configuration.
During the boot process or the initilisation of Lua keys, there were sporadic errors when executing the initial code. Now the error has been resolved.
Display errors and crashes occurred when importing configurations with the maximum number of Lua speed dialling keys. Now this bug is fixed by working on the Lua managers.
While holding and calling another call partner, unwanted audio effects occurred during the first two to three ring tones. Now this behaviour is fixed.
The volume control was changed with the firmware update to version 2.0. This change caused the volume for hands-free calling and ringing to be too low. Now the volume control has been adjusted.
After the firmware update to version 2.0A, the COMfortel D-series devices sporadically had audio problems. Now these problems are solved.
After a firmware update to version 2.0B, sporadically quiet calls occurred. Now this behaviour is fixed.
Languages | Current version | ||
---|---|---|---|
Quick Guide | V01 12/2019 | ||
Instructions | V02 10/2020 | ||
End User License Agreement for Software (EULA) | V03 05/2021 | ||
Privacy Policy | V02 05/2021 | ||
Advanced Information | V07 12/2021 | Online PDF | |
V07 12/2021 | Online PDF | ||
V07 12/2021 | Online PDF | ||
Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.0C |
Licenses: License path adapted
Note about EN 62368-1 8.7, 8.11 deleted.
2 USB ports: COMfortel ® D-XT20i complemented
A2: COMfortel ® D-XT20i complemented. Bluetooth-Dongle complemented.
Floating user licence replaces Concurrent User License
General info: Description added
Data Controller: Description added
Data Protection Officer: Description added
LDAP / LDAPS: Description added
CardDAV-CalDAV: Description added
Rights of the person concerned: Description added
Help/instructions for phones of the COMfortel D-Serie from firmware version 2.0
Contains information about the new firmware version
New function.
Play popup notification sound: New setting for the configuration.
New function.
Beep when connecting: New setting for the configuration.
Interrupt active calls: New setting for the configuration.
New function.
New function.
New parameter InterCom.
New settings for register and subscription.
New status bars.
Note on possible hazards.
Note on paired devices.
Note for handling after a firmware update.
Extended function.
Extended function.
Extended function.
ICE: New setting for the configuration.
Data is not sent but received.
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
Languages | Current version | ||
---|---|---|---|
End User License Agreement for Software (EULA) | V03 05/2021 | ||
Privacy Policy | V02 05/2021 | ||
Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.0B |
The update is carried out via the address https://update.auerswald.de.
This address must be entered on the phone under Menu -> Settings -> Firmware update -> Update server URL.
Further information about the update process can be found in the Auerswald Developer
The following settings have been moved from Identities to Network > Topology:
The parameters for SIP NAT Traversal have been grouped. The Use ICE function has been implemented.
The descriptions of particular events can be displayed as popup messages.
New settings:
Used to restrict the phone's configuration by assigning user roles.
For configuring user accounts manually.
Record network event logs if the phone malfunctions.
If there is an error: Sets the interval for registration attempts or for establishing a subscription on the PBX/provider.
Status displays also provided in the web interface.
Automatic answer is now called Automatic call acceptance.
Realm is now called SIP domain.
Displays exchange lines/groups (COMmander/COMpact from FW 8.2A, COMtrexx at a later date)
Due to an error in the SIP provisioning, the PBX could not trigger the provisioning of the phone. Now the error has now been resolved.
The CSV import of PBX contacts with more than 32 characters and the resulting invalid display names led to phone crashes. Now parse errors no longer lead to crashes.
Thanks to improved subscription management, crashes in the phone could be resolved.
After the firmware update to version 2.0A, the COMfortel D-series devices sporadically had audio problems. Now these problems are solved.
If the attempt to put a call on hold was rejected by the PBX, it still appeared as a call on hold in the display. Now the message Hold unsuccessful appears and the call is displayed normally.
Languages | Current version | ||
---|---|---|---|
Quick Guide | V01 12/2019 | ||
Instructions | V02 10/2020 | ||
End User License Agreement for Software (EULA) | V03 05/2021 | ||
Privacy Policy | V02 05/2021 | ||
Advanced Information | V07 12/2021 | Online PDF | |
V07 12/2021 | Online PDF | ||
V07 12/2021 | Online PDF | ||
Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 2.0B |
Licenses: License path adapted
Note about EN 62368-1 8.7, 8.11 deleted.
2 USB ports: COMfortel ® D-XT20i complemented
A2: COMfortel ® D-XT20i complemented. Bluetooth-Dongle complemented.
Floating user licence replaces Concurrent User License
General info: Description added
Data Controller: Description added
Data Protection Officer: Description added
LDAP / LDAPS: Description added
CardDAV-CalDAV: Description added
Rights of the person concerned: Description added
Help/instructions for phones of the COMfortel D-Serie from firmware version 2.0
Contains information about the new firmware version
New function.
Play popup notification sound: New setting for the configuration.
New function.
Beep when connecting: New setting for the configuration.
Interrupt active calls: New setting for the configuration.
New function.
New function.
New parameter InterCom.
New settings for register and subscription.
New status bars.
Note on possible hazards.
Note on paired devices.
Note for handling after a firmware update.
Extended function.
Extended function.
Extended function.
ICE: New setting for the configuration.
Data is not sent but received.
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
Languages | Current version | ||
---|---|---|---|
End User License Agreement for Software (EULA) | V03 05/2021 | ||
Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 1.10A | ||
Privacy Policy | V02 05/2021 |
The update is carried out via the address https://update.auerswald.de.
This address must be entered on the phone under Menu -> Settings -> Firmware update -> Update server URL.
Further information about the update process can be found in the Auerswald Developer
You find further information about functions or configuration in the Advanced Information/online help. In this chapter, features/improvements and bug-fixes for this version are described.
Languages | Current version | ||
---|---|---|---|
Quick Guide | V01 12/2019 | ||
Instructions | V02 10/2020 | ||
Advanced Information | V06 05/2021 | Online PDF | |
V06 05/2021 | Online PDF | ||
V06 05/2021 | Online PDF | ||
End User License Agreement for Software (EULA) | V03 05/2021 | ||
Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 1.10A | ||
Privacy Policy | V02 05/2021 |
Licenses: License path adapted
Note about EN 62368-1 8.7, 8.11 deleted.
2 USB ports: COMfortel ® D-XT20i complemented
A2: COMfortel ® D-XT20i complemented. Bluetooth-Dongle complemented.
Device Information: Description for new function added
Gesture control: Description added
Wallpaper: Description for new function added
Contacts: Description for new function added
LDAP: Description for new function added
Roaming User : Description for new function added
Central caller list: Description for new function added
Display > LED notifications > Message key LED: Description for new functions added
Function keys > Edit parameters: Description for new function added
Using provisioning > Schedule > Time: Note added
LDAP > LDAP filter > Name format: Description for new option added
Ringtones > Ringtones by call type: Figure adjusted to new web interface
Ringtones > Ringtone management: Description for new functions added
Basic Knowledge > Display > Notifications: Icon added
Gallery: Description for new function added
Settings > Display and LED > Message key LED: Description for new function added
Settings > Display and LED > Reset Wallpaper: Description for new function added
Settings > Network > Current Settings: Description added
Settings > Function keys > Edit parameters: Description for new function added
Settings > LDAP > LDAP filter > Name format: Description for new option added
Floating user licence replaces Concurrent User License
General info: Description added
Data Controller: Description added
Data Protection Officer: Description added
LDAP / LDAPS: Description added
CardDAV-CalDAV: Description added
Rights of the person concerned: Description added
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel M-710
COMfortel M-720
COMfortel M-730
COMfortel WS-500M
COMfortel WS-500S
COMtrexx
For the following firmware:
PBX systems: as of 8.0
D-Series: as of 1.10
COMfortel-IP: as of 2.8F
COMfortel-M/WS: as of 2.39
COMtrexx: as of 1.4
For the following products:
For the following firmware:
Language:
Languages | Current version | ||
---|---|---|---|
End User License Agreement for Software (EULA) | V02 10/2020 | ||
Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 1.8C |
The update is carried out via the address https://update.auerswald.de.
This address must be entered on the phone under Menu -> Settings -> Firmware update -> Update server URL.
Further information about the update process can be found in the Auerswald Developer
You find further information about functions or configuration in the Advanced Information/online help. In this chapter, features/improvements and bug-fixes for this version are described.
Languages | Current version | ||
---|---|---|---|
Quick Guide | V01 12/2019 | ||
Instructions | V02 10/2020 | ||
Advanced Information | V05 01/2021 | Online PDF | |
V05 01/2021 | Online PDF | ||
V05 01/2021 | Online PDF | ||
End User License Agreement for Software (EULA) | V02 10/2020 | ||
Open source licenses COMfortel D-1x0 / D-2x0 / D-400 / D-600 | 1.8C |
Licenses: License path adapted
Note about EN 62368-1 8.7, 8.11 deleted.
2 USB ports: COMfortel ® D-XT20i complemented
A2: COMfortel ® D-XT20i complemented. Bluetooth-Dongle complemented.
Automatic Answer: Description for new option added
Bluetooth>Configuration: Note about powerless insert of dongles added
Update: Note about time of update search added
Camera: Note about specification of image files added
Sync: Description for new app added
Basic Knowledge>Operating Instructions>Overview: Figure adjusted to new web interface
Dashboard>Status information: Icons adjusted to new web interface
Function keys>Overview>Phone user interface: Figure revised
Function keys>Overview>Phone user interface: Description revised
Identities>Options for experts>Subscription interval (min): Description for new function added
Network>VPN>VPN type: Description for new option added
Telephony>Call settings>Automatic Answer: Description for new function added
Basic Knowledge>Display>Function keys: Description revised
Basic Knowledge>Apps>All Apps: Description for new function added
Sync: Description for new function added
Settings>Telephony>Automatic Answer: Description for new function added
Settings>Identities>Options for experts>SIP>Subscription interval (min): Description for new function added
Settings>Network>VPN>User name: Description for new option added
Settings>Network>VPN>Password: Description for new option added
Settings>Function keys>Choose the key you want to modify, or add a new key: Description for new function added
Settings>Access>Extended Logging: Description for new option added
For the following products:
COMfortel D-100
COMfortel D-110
COMfortel D-200
COMfortel D-210
COMfortel D-400
COMfortel D-600
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
COMfortel 1400 IP
COMfortel 2600 IP
COMfortel 3600 IP
COMfortel M-510
COMfortel M-520
COMfortel M-530
COMfortel WS-500M
COMfortel WS-500S
For the following firmware:
TK systems: from 7.8C
D series: from 1.8A
COMfortel-IP: from 2.8G
COMfortel-M/WS: from 2.36
Languages | Current version | ||
---|---|---|---|
End User License Agreement for Software (EULA) | V01 10/2019 | ||
Open source licenses COMfortel D-100 / D-200 / D-400 | 1.6A |
The update is carried out via the address https://update.auerswald.de.
This address must be entered on the phone under Menu -> Settings -> Firmware update -> Update server URL.
Further information about the update process can be found in the Auerswald Developer
New Features/Improvements
Bug-Fixes
Languages | Current version | ||
---|---|---|---|
Quick Guide | V01 12/2019 | ||
Statements of conformity D-400 | V01 03/2019 | ||
End User License Agreement for Software (EULA) | V01 10/2019 | ||
Advanced Information | V04 10/2020 | Online PDF | |
V04 10/2020 | Online PDF | ||
V04 10/2020 | Online PDF | ||
Open source licenses COMfortel D-100 / D-200 / D-400 | 1.6A | ||
Instructions | V02 10/2020 |
Reset to default > Configuration: Description for new function added
Call Completion: Description for new function added
Bluetooth: Description for new function added
Device Information: Description for new function added
Identities > General: Description revised
Camera: Description for new function added
Contacts: Description revised due to function changes
Logging: Description for new function added
Call bindings: Description for new function added
Sound > Priority for defining ringtones: Description for new function added
Rear View: Description revised due to function changes
Dashboard: Setting path adapted
Dashboard > Status information > Update system version / Bootloader version: Description for new option added
Dashboard > Device name: Description for new function added
Identities > Basic Network Settings > Ringer Tone: Description for new option added
Identities > Registrar > Port: Note about different entries added
IP camera: Description for new function added
Update: Setting path adapted
Update > Restart and factory reset: Description for new function added
Network > IPv6 > IPv6 mode: Description revised due to function changes
Network > IPv6 > Privacy Extensions: Description for new option added
Telephony > Call signalling > Call Completion: Description for new function added
Telephony > Call settings > Call signalling > Call Completion: Description for new function added
Telephony > Call bindings: Description for new function added
Ringtones: Description for new function added
User > Settings > Password: Description revised
Access > Action URL > Action URL server: Description revised
Access > Logging: Description for new function added
Basic Knowledge > Display > Display overview > Call bindings: Description for new function added
Basic Knowledge > Display > System icons > Call Completion / Headset / Bluetooth: Figures added
Settings > Network > IPv6 Settings > IPv6 mode: Description revised due to function changes
Settings > Network > IPv6 Settings > Privacy Extensions: Description for new option added
Settings > Telephony > Call Completion: Description for new function added
Settings > Telephony > Call bindings: Description for new function added
Settings > Identities > Options for experts > Ringer Tone: Description for new function added
Settings > Bluetooth: Description for new function added
Settings > Sound > Ringtones by call type: Description for new function added
Settings > Camera: Description for new function added
Settings > Update: Setting path adapted
Settings > Update > Restart phone / Reset to default: Description for new function added
Settings > About phone > Device name: Description for new function added
Bootloader: Description for new function added
Build number: Description for new function added
EHS: Description revised
Licenses: License path adapted
Note about EN 62368-1 8.7, 8.11 deleted.
2 USB ports: COMfortel ® D-XT20i complemented
A2: COMfortel ® D-XT20i complemented. Bluetooth-Dongle complemented.
For the following products:
COMfortel D-100
COMfortel D-200
COMfortel D-400
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
For the following firmware:
TK systems: from 7.6B
D series: from 1.2A
Languages | Current version | ||
---|---|---|---|
Open source licenses COMfortel D-100 / D-200 / D-400 | 1.4A | ||
End User License Agreement for Software (EULA) | V01 10/2019 |
The update is carried out via the address https://update.auerswald.de.
This address must be entered on the phone under Menu -> Settings -> Firmware update -> Update server URL.
Further information about the update process can be found in the Auerswald Developer
Improvements
Bug Fixes
Languages | Current version | ||
---|---|---|---|
Open source licenses COMfortel D-100 / D-200 / D-400 | 1.4A | ||
Instructions | V01 10/2019 | ||
Quick Guide | V01 12/2019 | ||
Advanced Information | V03 05/2020 | Online PDF | |
V03 05/2020 | Online PDF | ||
V03 05/2020 | Online PDF | ||
Statements of conformity D-400 | V01 03/2019 | ||
End User License Agreement for Software (EULA) | V01 10/2019 |
For the following products:
COMfortel D-100
COMfortel D-200
COMfortel D-400
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
For the following firmware:
TK systems: from 7.6B
D series: from 1.2A
Languages | Current version | ||
---|---|---|---|
Open source licenses COMfortel D-100 / D-200 / D-400 | 1.4A | ||
End User License Agreement for Software (EULA) | V01 10/2019 |
The update is carried out via the address https://update.auerswald.de.
This address must be entered on the phone under Menu -> Settings -> Firmware update -> Update server URL.
Further information about the update process can be found in the Auerswald Developer
Improvements
Bug Fixes
Languages | Current version | ||
---|---|---|---|
Open source licenses COMfortel D-100 / D-200 / D-400 | 1.4A | ||
Instructions | V01 10/2019 | ||
Quick Guide | V01 12/2019 | ||
Advanced Information | V03 05/2020 | Online PDF | |
V03 05/2020 | Online PDF | ||
V03 05/2020 | Online PDF | ||
Statements of conformity D-400 | V01 03/2019 | ||
End User License Agreement for Software (EULA) | V01 10/2019 |
For the following products:
COMfortel D-100
COMfortel D-200
COMfortel D-400
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
For the following firmware:
TK systems: from 7.6B
D series: from 1.2A
Languages | Current version | ||
---|---|---|---|
Open source licenses COMfortel D-100 / D-200 / D-400 | 1.2A | ||
End User License Agreement for Software (EULA) | V01 10/2019 |
Languages | Current version | ||
---|---|---|---|
Advanced Information | V02 12/2019 | Online PDF | |
V02. 12. 2019 | Online PDF | ||
V02. 01. 2020 | Online PDF | ||
Instructions | V01 10/2019 | ||
Quick Guide | V01 12/2019 | ||
Open source licenses COMfortel D-100 / D-200 / D-400 | 1.2A | ||
Statements of conformity D-400 | V01 03/2019 | ||
End User License Agreement for Software (EULA) | V01 10/2019 |
For the following products:
COMfortel D-100
COMfortel D-200
COMfortel D-400
COMmander 6000/R/RX
COMpact 4000
COMpact 5000/R
COMpact 5200/R
COMpact 5500R
For the following firmware:
TK systems: from 7.6B
D series: from 1.2A