General information

Change of term

license server became CIC (COMtrexx Initialisation Center)

Improvements

Auerproxy server

Improved communication between COMtrexx and Auerproxy-Server.

COMfortel Softphone 2

Improved communication/synchronisation between COMtrexx and COMfortel SoftPhone 2.

MFA

Improved collaboration with password managers (automatic completion of form fields).

Service data

Prevention of unnecessary notifications.

Bug Fixes

a/b-Audiobox (only COMtrexx Business/Flex)

The listening direction for the a/b audio box was not switched through, so the recorded gong and confirmation tones could not be heard on the phone.

Fax box

Under certain circumstances, fax reception errors may occur.

Firmware Update

No message was displayed when manually selecting an invalid firmware file.

Import audio files

Functions > Music on Hold/announcements > File management > Import: Audio files could not be imported.

Import certificates

Administration > Certificates > Import: Certificates could not be imported.

Contacts

Under certain circumstances, CSV import errors may occur.

Phone number display

After updating to version 2.4.4, the leading 0 may have been missing in the call number display. It was therefore not possible to call back from the caller list.

During an internal call, your own group may have been displayed instead of the other party.

Security

After updating to version 2.4.4, errors could occur when blocking IP addresses.

Telephoning

After updating to version 2.4.4, errors could occur during call setup in connection with handsets on a COMfortel WS-500.

Random reboot when using the TAPI services

When using the TAPI services, the PBX could restart.

Known bugs in version 2.4.5

Change administrator access

Administration > Contact information > Change administrator access: The dialogue may not open. Workaround: Switch briefly to the following page and then back again: Administration > Licences

Automatic restart after update

After a manual firmware update, the selected automatic restart may not be carried out. In this case, restart the device manually to activate the update: Via the update dialogue or via Administration > Maintenance > Update and Restart > Restart > Reset of the PBX (Restart)

Export Service data

Administration > Maintenance > Backup > Exporting service data > OK > Backup: After accepting the legal information, it takes approx. 20 seconds until the dialogue for saving the file appears.

• Downloads
• Notes

General information

Change of term

Feature level became Version status

Privacy Policy

Updated Privacy Policy at:Dashboard > Legal > Data protection

New functions

MFA

In addition to the security provided by the user name and password access data, the configuration can now be secured using multi-factor authentication (MFA). The COMtrexx supports MFA using time-based one-time passwords (TOTP).
A new input field now appears in the login dialogue: MFA Code
The field initially remains empty. Only when MFA has been set up, you must enter the time-limited one-time password (TOTP) issued by the Authenticator app when logging in.

Improvements

E-Mail registration data

Additional information, e.g. phone number of the softphone.

Provisioning

The certificats of the base stations COMfortel WS-500S/500M were updated for provisioning support of future versions.

A heading has been changed in the template for base stations COMfortel WS-500S/500M.
ws500x_template.xml: <!-- Point Omega Alarm Server --\> became <!-- Alarm Server --\>

Service data

Prevention of unnecessary data accumulation.

Bug Fixes

COMtrexx Control Center

Under certain circumstances, pairing errors may occur.

LDAP

Query of LDAP data has been limited to 500 entries.

Emergency numbers

Dialled emergency numbers may have been shown incorrectly on the display.

Telephoning

Echoes could occur when using analogue telephones in external calls.

Web interface

Exchange lines > Exchange line routing: Pages/buttons may not have been displayed correctly.

Functions > Time control > Switching times > New: New switching times are always entered for Monday.

Known bugs in version 2.4.4

Change administrator access

Administration > Contact information > Change administrator access: The dialogue may not open. Workaround: Switch briefly to the following page and then back again: Administration > Licences

Automatic restart after update

After a manual firmware update, the selected automatic restart may not be carried out. In this case, restart the device manually to activate the update: Via the update dialogue or via Administration > Maintenance > Update and Restart > Restart > Reset of the PBX (Restart)

Export Service data

Administration > Maintenance > Backup > Exporting service data > OK > Backup: After accepting the legal information, it takes approx. 20 seconds until the dialogue for saving the file appears.

Import audio files

Functions > Music on Hold/announcements > File management > Import: Audio files cannot be imported. Workaround: For a necessary import, switch to the previous version 2.4.3 and then back (reboot).

Import certificates

Administration > Certificates > Import: Certificates cannot be imported. Workaround: For a necessary import, switch to the previous version 2.4.3 and then back (reboot).

• Downloads
• Notes

Known bugs in version 2.4.3

Automatic restart after update

After a manual firmware update, the selected automatic restart may not be carried out. In this case, restart the device manually to activate the update: Via the update dialogue or via Administration > Maintenance > Update and Restart > Restart > Reset of the PBX (Restart)

Improvements

Auerproxy server

The registration status of the Auerproxy server is now displayed in the web interface:Administration > VoIP > Proxy server for Online services > SIP proxy

Improved system messages (notifications and email sending), e.g. no more system emails are sent in the event of a nightly DSL reconnect.

COMfortel SoftPhone

An extended re-registration time now prevents the softphone from being unavailable after a long period of non-use (e.g. weekend).

Bug Fixes

InterCom

When making an InterCom call to a group, it could happen that not all group members were called.

LDAP

After updating to version 2.4.2, contact data transferred via LDAP may no longer be displayed.

Pick-up

After updating to version 2.4.2, pick-up may no longer work.

Logging / network trace

Administration > Service > Network Diagnosis > Start Trace: Since version 2.4.2, the network trace also records any second network interfaces that may be present and simultaneously creates the debug log without the use of Wireshark. However: This was previously only possible if no Wireshark log was running and logging was enabled. Now a network trace starts even if logging is diasebled:Administration > Service > Logging

Web interface

After updating to 2.4.2, some dialogues (e.g. creating/editing phones/devices) only closed after clicking the X or close button several times.

Random terminations when using the central caller list

When using the central caller list, calls could be interrupted.

• Downloads
• Notes

Known bugs in version 2.4.2

LDAP

After the update, contact data transferred via LDAP may no longer be displayed. Workaround: If you do not use the new LDAP proxy function, enter the following default value here in any case: Administration > Network > Server service > LDAP proxy > LDAP server address > 127.0.0.1

Logging / network trace

Administration > Service > Network Diagnosis > Start Trace: The network trace now also records any existing second network interfaces and simultaneously creates the debug log without the use of Wireshark.. However: This is currently only possible if no Wireshark log is running and logging is activated: Administration > Service > Logging > Logging activated

Web interface

After the update, some dialogues (e.g. new creation/editing of phones/devices) only close after clicking the X or the close button several times. Workaround: Switch to the page to be edited and press F5. Then make the changes.

General information

Privacy Policy

Revised information on data protection.

Improvements

Holidays

New and optimised calendar page.

InterCom

The maximum length of an InterCom connection has been extended from 2 to 5 minutes. The connection can be terminated by hanging up or ends automatically after 5 minutes.

LDAP

Internal telephones can now access an external LDAP server via the COMtrexx used as an LDAP proxy: Administration > Network > Server service > LDAP proxy

Logging / network trace

Administration > Service > Network Diagnosis > Start Trace: The network trace now also records any existing second network interfaces and simultaneously creates the debug log without the use of Wireshark.. However: This is currently only possible if no Wireshark log is running and logging is activated: Administration > Service > Logging > Logging activated

Provisioning / Update

d-series_template.xml: Telephones of the COMfortel D-series now are supplied with updates from the update server even without their own Internet access. For this purpose, the update via the COMtrexx was added as an update server URL in the provisioning template of the COMfortel D-series telephones. In individually created provisioning files, this change must be transferred manually. However, if this change is not to be made, for example because a separate update server is used for the telephones, an individual provisioning file with a customised update server URL may need to be created for this purpose.
<update>
<url>http://$(sip.server)/fwupdate</url>
</update>

Ringer

An alternative can now be configured for the exchange line replacement tone if the previous exchange line replacement tone was perceived as annoying: Exchange lines > Providers and Accounts > Configure provider > RTP > Use the exchange line replacement tone

Security

Synchronisation with a Google account

Improved security when synchronising with a Google account. For certain requests when synchronising with a Google account, the COMtrexx now requires access to the Auerproxy server. Make sure that the address and port are reachable.

TAPI communications

Improved security with TAPI communications. By specifying the IP address with which TAPI communication is permitted, access by unknown applications can now be prevented: Administration > Network > Server service > LAN TAPI > IP address of TSP-Clients

Bug Fixes

Restart

After updating to version 2.4.0, the COMtrexx restarted automatically under certain circumstances.

Synchronisation with a Google account

After updating to version 2.4.0, authentication was not possible under certain circumstances.

• Downloads
• Notes

Known bugs in version 2.4.0

LDAP

After the update, contact data transferred via LDAP may no longer be displayed. Workaround: If you do not use the new LDAP proxy function, enter the following default value here in any case: Administration > Network > Server service > LDAP proxy > LDAP server address > 127.0.0.1

Web interface

After the update, some dialogues (e.g. new creation/editing of phones/devices) only close after clicking the X or the close button several times. Workaround: Switch to the page to be edited and press F5. Then make the changes.

General information

Privacy Policy

Revised information on data protection.

Improvements

InterCom

The maximum length of an InterCom connection has been extended from 2 to 5 minutes. The connection can be terminated by hanging up or ends automatically after 5 minutes.

LDAP

Internal telephones can now access an external LDAP server via the COMtrexx used as an LDAP proxy: Administration > Network > Server service > LDAP proxy

Logging

The debug log can now be created directly via the network trace without the use of Wireshark. The network trace also records any existing second network interfaces.

Provisioning / Update

d-series_template.xml: Telephones of the COMfortel D-series now are supplied with updates from the update server even without their own Internet access. For this purpose, the update via the COMtrexx was added as an update server URL in the provisioning template of the COMfortel D-series telephones. In individually created provisioning files, this change must be transferred manually. However, if this change is not to be made, for example because a separate update server is used for the telephones, an individual provisioning file with a customised update server URL may need to be created for this purpose.
<update>
<url>http://$(sip.server)/fwupdate</url>
</update>

Ringer

An alternative can now be configured for the exchange line replacement tone if the previous exchange line replacement tone was perceived as annoying: Exchange lines > Providers and Accounts > Configure provider > RTP > Use the exchange line replacement tone

Security

Synchronisation with a Google account

Improved security when synchronising with a Google account. For certain requests when synchronising with a Google account, the COMtrexx now requires access to the Auerproxy server. Make sure that the address and port are reachable.

TAPI communications

Improved security with TAPI communications. By specifying the IP address with which TAPI communication is permitted, access by unknown applications can now be prevented: Administration > Network > Server service > LAN TAPI > IP address of TSP-Clients

• Downloads
• Notes

Improvements

Backup and restore

Clear error messages in the event of a non-functioning backup.

Service data

Prevention of unnecessary notifications.

Bug fixes

E-mail transfer

Data from deleted outgoing mail servers may still have been used.

Holidays

When a new public holiday was created, an additional public holiday was always created on the following day.

FONtevo

Misleading error message when commissioning FONtevo phones on COMtrexx Next.

MWI

Signalling on DECT handsets did not work if several telephones were assigned to the user.

PBX Call Assist

In the call list of the PBX Call Assist, the internal user number was displayed instead of the dialled external number in the event of unsuccessful calls.

Key functions

Only COMtrexx Flex: The factory settings could not be restored with the key function.

Voice mail and fax boxes

Onky COMtrexx Business: After updating to version 2.2.1, an unused USB stick led to non-functioning voice mail and fax boxes. The USB stick is now ignored again.

Music on hold

After announcement before answering, music on hold was played during the call phase, even if the function was switched off.

Web interface

Administration > Network > Server service > SFTP server: Superfluous settings removed.

• Downloads
• Notes

General information

COMtrexx Flex

New hardware variant COMtrexx Flex available for up to 250 users.

Improvements

Change of term

Proxy server for COMfortel SoftPhonerenamed toProxy server for Online services.

Various texts in the COMtrexx Control Center environment.

E-mail transfer

Emails could not be sent if the sender's email address did not match the server. Now any e-mail address is accepted if only one outgoing mail server has been set up. If you set up more than one outgoing mail server, the domains of the senders must match the addresses of the associated outgoing mail servers in order for emails to be sent (e.g. emailcomtrexx@web.de with smtp.web.de).

Bug Fixes

InterCom

The automatic termination of an InterCom connection only worked on the initiating telephone, but not on the InterCom destination.

Provisioning

Auto-provisioning (zero-touch) of Snom phones was no longer possible.

Status display Presence

The status of redirected users may not have been displayed correctly.

Voice mail and fax boxes

Boxes deleted via the web interface were not deleted correctly and were displayed again after a restart.

• Downloads
• Notes

General information

COMtrexx Next

New hardware variant COMtrexx Next available for small expansion stages up to 40 users.

Security

Communications

Improved security and compatibility (activation of TLS 1.3 for SIP and WEB, removal of TLS 1 and 1.1).

New functions

Remote configuration via Auerswald remote access (ARA) server

With version 2.2 of the COMtrexx Control Center, remote configuration can be initiated via the Auerswald Remote Access (ARA) Server in future.

Network interface (second)

It is now possible to set up a second network interface in the PBX under the following conditions.

• Upgrade with a NET-Modul (only COMtrexx Business)
• Installation of a second network adapter/card (only COMtrexx VM)

Improvements

E-mail transfer

Improved e-mail dispatch with new SMTP server. Emails can now also be sent via Microsoft 365. Emails can now also be sent via Microsoft 365.

Device properties

It is now possible to specify for IP devices which IP protocol is to be used by the device for the connection to the COMtrexx.

Online Help

All information on hardware and VM variants is now also available in the online help.

Provisioning

d-series_template.xml: To prevent repeated attempts to subscribe to a voicemail box after logging out (roaming user), a subscription failure handling function has been added to the COMfortel d-series phone template for the identity. In individually created provisioning files, this change must be transferred manually.
<subscriptionFailureHandling>...</subscriptionFailureHandling>

Transfer configuration

A configuration can now be transferred from one variant to a specific other variant.

Bug Fixes

Analogue fax machine

With some providers it was not possible to send fax messages in the local phone network.

Note: : If an analogue telephone and a user instead of an external device fax were temporarily configured as a workaround, this must be reversed.

Logging into the Web Interface

Only applies to version 2.2.0 COMtrexx Next: After deleting all contacts, it was no longer possible to log in.

LDAP

If automatic exchange line request was switched off, the 0 for exchange line request was not transferred to the contacts. External calls initiated via the contacts failed. LDAP now checks the automatic exchange line request when a call number is requested. If the telephone number to be supplied has more than 4 digits, it is regarded as external and preceded by an exchange line access number.

Note: For the few exceptions where telephone numbers with less than 5 digits are external, these must be entered with the local area code.

If automatic exchange line request was switched off, no internal phone numbers/contacts were displayed for newly created users.

An unnecessary empty contact Admin was displayed in the COMfortel D-series phone.

LDAP / Voicemail App

If automatic exchange line request was switched off, the callback via the voicemail app did not work on a COMfortel D-series phone.

NAT traversal

The public IP address was also sent in the header, even if the option was switched off.

Presence

After logging out (roaming user), a COMfortel D-series phone was still displayed as available.

Call forwarding

External call forwarding was always carried out via accounts at the system location and sometimes failed. The account associated with the redirected number is now used.

Web interface

Functions > Time control > Switching times: The number of possible switching times was not displayed correctly.

• Downloads
• Notes

Improvements

CCC

Various improvements/extensions in communications with the CCC.

Provider settings

SIP > NAT traversal: Advanced Settings.

Settings > STUN server (IP address or URL): Removed redundant checkbox.

Settings > Deregister, if there are NAT changes: can now be enabled again.

Provisioning

ws500x_template.xml: To avoid incorrect licence displays in the handsets, changes have been made to the default template of the COMfortel WS-500M/500S. In individually created provisioning files, this change must be transferred manually:
<!-- Handsets -->...</oper>

https://www.auerswald.de/en/start/support/faq/default-54d7f3d99a

Bug Fixes

COMfortel SoftPhone

Changing ports were used to connect to the proxy server. Now a fixed port is always used.

Softphones with a '+' in the password could not register. This remains the case. Automatically generated passwords no longer contain a '+'. For manually entered passwords, the '+' must be avoided/removed.

Note: When using the COMfortel SoftPhone for Windows, the IPv6 address of the PC must currently be/remain disabled for a stable telephony function.

Remote Backup

With larger amounts of data (e.g. due to longer announcements), error messages occurred during the backup.

Do not disturb status display

The status of the Do Not Disturb function was displayed incorrectly if the status was changed during a set rework time.

System messages

In rare cases, there were erroneous system messages regarding the fan.

Web interface

Administration > Licences: In connection with the feature level, there were misleading displays.

Voice mail and fax boxes > Profiles > Configure > Call-specific behaviour: Recordings could not be enabled.

• Downloads
• Notes

Improvements

Maximum Hold time after Announcement before answering

The previously fixed holding time of 8 minutes in the queue of a group can now be extended to up to 30 minutes. The value can be set separately according to groups: Groups > Phone numbers > Configure > Reachability > Maximum Hold time after Announcement before answering

Bug Fixes

APIPA

Even if the fixed IP address was switched off from the APIPA address range, the COMtrexx could be reached via this IP address.

Codecs

The Codec G.729 could not be used from internal telephones.

D1-Net

Incoming calls from the D1 net were no longer signalled.

Fax printer driver

Communication between fax printer driver and COMtrexx was not possible. This is fixed with this version in conjunction with version 1.4.4.3 of the fax printer driver.

Note: If the use of HTTPS was temporarily switched off as a workaround, this must be reversed. This must be done on each PC used in the dialogue of the fax printer driver and here in the COMtrexx: Administration > Network > Server service > Force HTTPS connection

Import Provider template

After changing certain settings and exporting, provider templates could no longer be imported under certain circumstances.

Ringing sequence

The ringing sequence linear - fixed - rotating - split group did not work correctly.

Number presentation

In countries without an area code, there could be problems with number transfer.

Announcement before answering

Announcement before answering was not played at the target of a call forwarding if announcement before answering was not also active at the forwarding party.

Connection setup

Connections with individual participants always broke off after a short time. Now improved handling of faulty ACK packets that reach the COMtrexx after modifications on the provider side.

Voicemail App COMfortel D series

When the voicemail app first accessed the COMtrexx, the voicemail boxes and messages were not displayed correctly.

In connection with the access of the voicemail app, problems could occur when accessing the web interface of the COMtrexx.

Voicemailbox: Save short messages

When this option was switched on, sibilant sounds were saved as a message after the caller hung up early.

Web interface

Administration > Maintenance > Message Configuration > Logo: A previously selected logo was no longer displayed when the page was called up again.

Administration > Network > Ports: The ports of the Auerswald Proxy was not displayed in the port view.

Special characters in passwords led to occasional problems.

• Downloads
• Notes

Known bugs in version 2.0.0

Analogue fax machine

With some providers it is not possible to send fax messages in the local phone network. Workaround: Temporarily configure for the fax an analogue telephone and a user instead of an external device fax.

Fax printer driver

Communication between fax printer driver and COMtrexx is not possible. Workaround: Temporarily switch off the use of HTTPS. This must be done on each PC used in the dialogue of the fax printer driver and here in the COMtrexx: Administration > Network > Server service > Force HTTPS connection

General information

Update

After the update to version 2.0, we recommend you delete the browser cache so that all pages are displayed correctly.

New functions

Contact image display

For incoming calls, contact pictures of the callers can now be displayed on a COMfortel D-series telephone (COMfortel D-400/D-600, firmware version 2.6B or later).

Important: The contact image display is only available with feature level 3 or higher. If you want to use this function, please contact your dealer or system partner.

Call number-dependent ringtones

On telephones that can process the transmitted information (COMfortel D-series telephones, firmware version 2.6B or later), now it is possible to distinguish not only the call types but also the calling and called numbers on the basis of the ringtones.

Important: The transmission of the calling and called numbers is only available with feature level 3 or higher. If you want to use this function, please contact your dealer or system partner.

Improvements

Presence status

In addition to the BLF status the COMtrexx now sends the presence status of the user so that, for example, an extended status display is possible.

Provisioning

ws500x_template.xml: To ensure data transmission and thus ringing of the handsets, the transport protocol was changed to TCP per variable in the template of the COMfortel WS-500S/500M base stations: "$(sip.transportprotocol:WS500X)"

Remote Backup

Display of the last and next backup with periodic backups set.

Certificates

The certificats of the certificate authorities were updated and new ones added.

Bug Fixes

InterCom

InterCom could only be initiated via programming sequence. Initiation via a target key on a COMfortel D-series telephone did not work.

Telephoning

Under certain circumstances there were call disruptions in connection with COMfortel 1400/2600/3600 IP telephones.

Announcement before answering

With certain settings announcement before answering did not work when calls were forwarded to groups.

Web interface

Administration > E-mail > Logo management: The page could not be open.

Administration > E-mail > Outgoing mail server > Default outgoing mail server: A new created outgoing mail server could not be selected as default under certain circumstances.

Administration > Network > Server service > Web server configuration > Forced logout if no action happens after: the setting did not work.

Administration > Maintenance > Backup > Remote Backup > Password: The display/hide of the password may not have worked correctly and lead to error messages.

Exchange lines > Providers and Accounts > Provider > Configure: The editing and saving of a provider could fail under certain circumstances. After that, telephony was no longer possible via the provider.

User > Profiles > Profile Configuration > Reachability > Blocklist (incoming)/Allowlist (incoming): When entering telephone numbers, incorrect operation and thus error messages could occur under certain circumstances.

User data > Contacts and assignment > Settings > LDAP server: The password could not be changed.

• Downloads
• Notes

Known bugs in version 1.10.2

Tryout Mode

Activating the tryout mode may take up to 24 hours.

General information

Update/Downgrade

Version 1.4.10 is required for an update to version 1.6.0 or higher. After the update to version 1.4.10 or higher, saving a firmware lower than 1.4.10 (downgrade) is no longer possible. After the update to version 1.6.3 or higher, saving a firmware lower than 1.6.3 (downgrade) is no longer possible. If it is necessary, please contact the Auerswald/FONtevo Support service.

Only COMtrexx VM: Updating to version 1.8.2 or higher may improve the audio quality. In order for the necessary changes to take effect, a double reboot must be carried out once after the update (usual reboot after the update plus additional reboot).

Privacy Policy

Updated Privacy Policy at:Dashboard > Legal > Data protection.

New functions

Remote Backup

A backup can now be stored password-protected on an external server and also restored from it.

Important: The remote backup is only available with feature level 2 or higher. If you want to use this function, please contact your dealer or system partner.

Important: If you want to use the remote backup server offered by Auerswald, please contact your dealer or system partner.

Information on using your own remote backup server can be found in the Auerswald DokuWiki

Improvements

External access

Administration > Service > External access > Access for CCC: Preparation for new service function.

Fail2Ban

Blocking times, reasons and notifications have been adjusted.

Changed setting

Telephones > Assignment > Configuration > Prevent update messages changed to Prevent early update messages: Case-by-case adjustments only necessary for early update notifications.

Internationalisation

Improved handling of international character sets.

NTP

Administration > Date and Time: Fundamental improvements in the handling of NTP.

Important: Please note that a previously switched off NTP server is switched on after the update with the standard NTP pool.

Provider settings

To prevent connection problems with various providers, additional settings have been added:Exchange lines > Providers and Accounts > Configure provider > SIP > Re-Registration after SIP Forbidden (403) and Re-Registration after SIP Timeout (408, 503)

Provisioning

comfortel_softphone_template.xml: To avoid routing problems, additions have been made to the standard template of the COMfortel SoftPhone. In individually created provisioning files, this change must be transferred manually:
true

standard.xml: To prevent dropouts in BLF signalling, the transport protocol was changed from UDP to TCP in the template of the COMfortel 1400 IP/2600 IP/3600 IP telephones. In individually created provisioning files, this change must be transferred manually:
$(sip.usesrtp:tcp,tcptls)

ws500x_template.xml: In order to be able to provision the network settings of an COMfortel WS-500M/500S, additions were made to the standard template of the COMfortel WS-500M/500S. In individually created provisioning files, this change must be transferred manually:
...

yealink_template.cfg: To prevent dropouts during BLF signalling, the TCP transport protocol was added to the template of the Yealink telephones. In individually created provisioning files, this change must be transferred manually:
account.1.sip_server.1.transport_type=1

Telephoning

When dialling a number without an area code, the phone's location (if set) or alternatively the user's location is now dialled in advance. The PBX location is only used here if no other location can be identified.

Bug Fixes

COMfortel SoftPhone

Calls answered on the COMfortel SoftPhone could not be transferred via blind transfer.

For the connection to the proxy server, changing ports were used instead of the set port. Now the set value + 1 is always used.

Blind transfer

The phones COMfortel 1400 IP/2600 IP/3600 IP were no longer able to blind transfer after the update to 1.8.2.

E-mail transfer

With longer voicemail messages, sending e-mails with attachments in MP3 format did not work under certain circumstances.

Call disruptions

There were call disruptions in connection with certain providers.

Contacts

User data > Contacts and assignment > Import > CSV import: Contacts could not be imported. Now the import is possible again. After the import, the page must be called up again. The takeover of the contacts takes place with: User data > Contacts and assignment > Apply CSV > Move

Contacts with UTF8 character set could not be found in the phone.

Logging

Administration > Network > Ports > Log in PCAP format (wireshark): Port for LAN 2 was missing in the overview.

Provider

Exchange lines > Providers and Accounts > Import > Load configuration: Direct loading of a provider template from the Internet was not available. Instead, the xml file in question must be saved temporarily and then imported.

Provisioning

Under certain circumstances, a telephone was not correctly provisioned after the user was changed or after the call number was changed. After that, telephony was no longer possible.

Special characters in SIP passwords led to occasional problems (e.g. device no longer registered after provisioning).

Proxy server

Misleading error messages and the sporadic creation of a coredump file when the internet connection was lost occurred.

REST API

An analogue device was created instead of a DECT device.

Call forwarding

In the case of external call forwarding via the system, the call number of the switchboard was transmitted instead of the forwarded call number.

System messages

Sending an e-mail was reported as successful when using special characters that were not possible, although no e-mail could be sent. Now this is correctly displayed in the system messages. Special characters that cannot be used are listed in the help.

Telephones

For COMfortel 1400/2600/3600 IP, calls accepted by other group members were still displayed in the caller list.

Web interface

Administration > Licences: The information on the expiry of licences may not have been correct.

Administration > Network > IP block- and allowlist > IP blocklist: The blocking time was not dispalyed correctly. Now the time until which the IP address is blocked is displayed instead.

User/Groups > Profiles: After a certain number of users/groups, profiles could no longer be created.

User data > Contacts and assignment > New > Phone numbers > User-defined: The user-defined designation for a phone number could not be saved.

User data > Call data: Sorting may not have worked as expected.

External Devices > Fax > New: A new entry here simultaneously led to the entry of a contact.

Telephones > Provisioning > New: Files may have been created twice.

Telephones > Assignment > Configuration > Jitter buffer: An invalid value was displayed.

Telephones > Assignment > New/Configuration > Model: A COMfortel M-710/720/730 could not be selected.

Telephones > Assignment/Status: The values of different terminals may not have been displayed correctly after provisioning.

Voice mail and fax boxes > Phone numbers > Configuration > Box settings > Outgoing mail server: The name was not dispalyed correctly.

A change of the user name admin during commissioning (initialisation) of the system was not transferred to a telephone of the COMfortel D-series.

• Downloads
• Notes

Known bugs in version 1.8.2

COMfortel SoftPhone

Calls answered on the COMfortel SoftPhone cannot be transferred via blind transfer.

Contacts

User data > Contacts and assignment > Import > CSV import: Contacts cannot be imported.

Provider

Exchange lines > Providers and Accounts > Import > Load configuration: Direct loading of a provider template from the Internet is not available. Instead, the xml file in question must be saved temporarily and then imported.

General information

Privacy Policy

Current Privacy Policy at:Dashboard > Legal > Data Protection.

Update/Downgrade

Version 1.4.10 is required for an update to version 1.6.0 or higher. After the update to version 1.4.10 or higher, saving a firmware lower than 1.4.10 (downgrade) is no longer possible. After the update to version 1.6.3 or higher, saving a firmware lower than 1.6.3 (downgrade) is no longer possible. If it is necessary, please contact the Auerswald/FONtevo Support service.

Only COMtrexx VM: Updating to version 1.8.2 or higher may improve the audio quality. In order for the necessary changes to take effect, a double reboot must be carried out once after the update (usual reboot after the update plus additional reboot).

New functions

Call flow display

For incoming calls, a COMfortel D-series telephone now displays which destination was called (external call number, group, forwarded destination).

Important: The call flow display is only available with feature level 2 or higher. If you want to use this function, please contact your dealer or system partner.

Google contacts

The contacts of the PBX can now be synchronised with existing Gmail accounts.

Important: The synchronisation with a Gmail account is only available with feature level 2 or higher. If you want to use this function, please contact your dealer or system partner.

OpenVPN Server

In order to be able to securely connect devices to the PBX, the PBX now offers an integrated OpenVPN server.

Important: The OpenVPN server is only available with feature level 2 or higher. If you want to use this function, please contact your dealer or system partner.

Improvements

Change of term

The term standard contact group, which was previously used twice, is now only used for the assignment to the user. The contact group type is now called PBX.

COMfortel SoftPhone

It is now displayed how long the COMfortel SoftPhone is available free of license costs:Administration > Licences

Initial Commissioning

The PBX can now be found in the network without knowing the IP address. Enter in the browser: comtrexx.local

Internal telephony

Faster call set-up for internal calls.

Provisioning

The provisioning templates for COMfortel SoftPhone and COMfortel WS-500x have been extended to address various issues with the end devices.

REST API

The device scheme and thus the creation of devices has been simplified.

A SIP soft client can now be created.

Telephony COMtrexx VM

Improved audio quality. Observe the note on rebooting after the update (see above).

Security

Fail2ban

Improved security by using Fail2ban.

Important: Note that the improved security may also lead to more blocking of non-malicious access. Even repeated "mistyping" when entering the password or a configuration error can lead to an entry in the IP blocklist.

Bug Fixes

Automatic configuration switching

Switching times entered for Saturday may also have been carried out on Sunday.

Automatic reception

Automatic reception did not work with DTMF inband or SIPINFO.

COMfortel D-Serie

After pressing the logout key, the IP address of the phone was entered in the IP blocklist.

COMfortel SoftPhone

Outgoing calls were terminated under certain circumstances after a short signalling. This could be fixed by the following setting:Telephones > Assignment > Configuration > RTP encryption > only unencrypted. Now the setting is already correct for a newly created phone.

COMtrexx VM for Oracle VM VirtualBox

When starting a COMtrexx VM from the saved state, the system time was not updated.

Fax machine

An external fax machine could not be called from a PTMP connection.

LAN TAPI

Calls could not be forwarded.

Fan

After a reboot, the fan of a COMtrexx Business may be running at full speed.

Monitoring or BLF

Individual functions such as park positions were not supported for BLF. Now VoIP end devices can monitor other internal users, groups, park positions of call parking, voice mail/fax boxes or door terminals using BLF and receive information about their calls or their busy status.

Web interface

Functions > Time control > Configurations > New: The dialouge could not be closed after the input. The newly created configuration was only visible after reloading the page.

Telephones > Provisioning > Import: The dialogue for overwriting a file could not be confirmed.

Administration > Service > Network Diagnosis > Ping: The ping was not carried out correctly.

A change of the user name admin at the first login was not carried out. The change is now made, but is not then transferred to a telephone of the COMfortel D-series. For this purpose, the admin user name and admin password must be changed here: Administration > Contact information > Administrator access > Administrator access

Filters entered may not have been applied correctly.

• Downloads
• Notes

General information

Update/Downgrade

Version 1.4.10 is required for an update to version 1.6.0 or higher. After the update to version 1.4.10 or higher, saving a firmware lower than 1.4.10 (downgrade) is no longer possible. After the update to version 1.6.3 or higher, saving a firmware lower than 1.6.3 (downgrade) is no longer possible. If it is necessary, please contact the Auerswald/FONtevo Support service.

Bug Fixes

COMfortel SoftPhone

For the connection to the proxy server, changing ports were used instead of the set port. Now the set value + 1 is always used.

When calling a COMfortel SoftPhone, faulty connections could occur under certain circumstances.

Telephony

If there are several simultaneous calls, the voice quality could be disturbed under certain circumstances.

Web interface

External Devices > Device wizard > New > Control by WEB WebRelay: The IP switch relay could not be created and set up correctly.

• Downloads
• Notes

General information

Update/Downgrade

Version 1.4.10 is required for an update to version 1.6.0 or higher. After the update to version 1.4.10 or higher, saving a firmware lower than 1.4.10 (downgrade) is no longer possible. After the update to version 1.6.3 or higher, saving a firmware lower than 1.6.3 (downgrade) is no longer possible. If it is necessary, please contact the Auerswald/FONtevo Support service.

Bug Fixes

BLF

After an incoming call with almost simultaneous call acceptance, the BLF status of the called users may not have been updated.

COMfortel SoftPhone

Outgoing and/or incoming calls were possibly no longer carried out (display "Forbidden" or caller receives busy).

Telephoning

Outgoing external calls were not carried out under certain circumstances, although free exchange lines were still available.

• Downloads
• Notes

General information

Update/Downgrade

Version 1.4.10 is required for an update to version 1.6.0 or higher. After the update to version 1.4.10 or higher, saving a firmware lower than 1.4.10 (downgrade) is no longer possible. After the update to version 1.6.3 or higher, saving a firmware lower than 1.6.3 (downgrade) is no longer possible. If it is necessary, please contact the Auerswald/FONtevo Support service.

Improvements

COMfortel SoftPhone

The PBX now sends periodic SIP OPTIONS keep-alives to keep the connection to proxy.auerproxy.de open at the application level (in conjunction with "intelligent" routers/firewalls).

SIP trace

Handling of "tel:" URIs now without enclosing brackets.

Bug Fixes

COMfortel SoftPhone

When the IP protocol IPv6 was activated, a COMfortel SoftPhone restarted permanently. This faulty restart behaviour is now fixed. Please note the following: IPv6 is not yet fully supported. However, the product can be used in conjunction with a so-called DualStack or DS-Lite Internet access.

COMtrexx VM for Oracle VM VirtualBox

The COMtrexx VM for Oracle VM VirtualBox could not be started on a Mac.

REST API

When creating a user, it was possible to enter unauthorised special characters.

Telephoning

On blind transfer (transfer without announcement) the call number of the person to be transferred was not transmitted to the transfer destination.

Web interface

User data > Contacts and assignment: After deleting entries, error messages could occur under certain circumstances.

Dashboard > Status information > Type: Under certain circumstances the wrong device type was displayed.

Groups > Phone numbers: The filters for displaying the groups did not work.

Telephones > Assignment: The filter for displaying the telephones was not taken into account during deletion.

Telephones > Assignment: The configuration of an analogue telephone could not be viewed/edited.

Central caller list

When saving entries in the central caller list (if activated), the PBX or individual services could restart under certain circumstances.

• Downloads
• Notes

General information

Update/Downgrade

Version 1.4.10 is required for an update to version 1.6.0 or higher. After the update to version 1.4.10, saving a firmware lower than 1.4.10 (downgrade) is no longer possible. If it is necessary, please contact the Auerswald/FONtevo Support service.

Improvements

Short code numbers

The number of possible macro short code numbers has been increased to 200.

REST API

Required and editable fields are now displayed as such.

Bug Fixes

COMfortel SoftPhone

When creating a SIP soft client, incorrect data was output and no configuration was possible.

A COMfortel SoftPhone created in a COMtrexx was displayed as PBX Call Assist when editing.

Logging

A Wireshark log did not contain all the information under certain circumstances.

REST API

When creating a user, it was possible to enter unauthorised special characters.

When creating a new unit, the password was assigned the value undefined.

An incorrect error code was issued when a unit was created twice.

When creating a user, incorrect values were output for userCategoryReadAccess, userCategoryWriteAccess and userCategoryDefaults.

COMtrexx VM: No error message was issued when creating an analogue device.

A certificate transmitted via REST API was not accepted by the PBX.

Incorrect values for device language and location were not caught.

Repeatedly setting a password may have caused the password to be recreated.

An incomplete POST may not have resulted in an error message.

TAPI

The TAPI method Call had stored wrong parameters.

Telephones

COMtrexx Business: Under certain circumstances, telephones were not registered.

Telephoning

A diverted call was incorrectly signalled to the caller as busy, although the number was reachable with a direct call.

Update

After a manual firmware update, the admin password was detected as incorrect.

Voice mail/fax

Sending faxes with the fax printer driver did not work.

The time set for the waiting time in case of non-registration may not have been saved correctly.

Web interface

Instead of the IP address of the registered device, the IP address of the PBX was output.

Under certain circumstances, the web interface was only accessible after a restart.

• Downloads
• Notes

Release notes for version 1.6.1

General information

Update/Downgrade

Version 1.4.10 is required for an update to version 1.6.0 or higher. After the update to version 1.4.10, saving a firmware lower than 1.4.10 (downgrade) is no longer possible. If it is necessary, please contact the Auerswald/FONtevo Support service.

After updating an existing COMtrexx VM to version 1.6.0 or higher, the virtual hard disk must be expanded manually afterwards. Further information is provided here: Auerswald DokuWiki

Bug Fixes

Call forwarding

With certain providers, call forwarding via the second B channel was not carried our correctly.

Telephones

COMfortel SoftPhone: After using the tryout mode and subsequent initialisation, the registration address was not updated. The COMfortel SoftPhone could no longer register.

After provisioning a D-series phone: The value for jitterbuffer was set to 0 ms. Now, the value ist set back to 60 ms after provisioning.

Web interface

Telephones > Assignment: A previously configured SIP soft client with a manually entered manufacturer Auerswald (e.g. soft client for PBX Call Assist) was automatically displayed as COMfortel SoftPhone after the update to 1.6.0. This led to a change in the display of the registration information. Now a distinction can be made between the COMfortel SoftPhone and PBX Call Assist models for the manufacturer Auerswald. For already configured SIP soft clients with the manufacturer Auerswald, this selection must be made subsequently in the settings after the update. Further information is provided here: Auerswald DokuWiki

Release notes for version 1.6.0

General information

Privacy statement

Revised information on data protection.

Feature level

Introduction of a feature level in preparation for future firmware versions: If there is a difference between the current feature level of the PBX and the maximum possible feature level, the full range of functions of the PBX cannot be used.

New functions

COMfortel SoftPhone

The PBX supports the COMfortel SoftPhone, a multi-platform client for Windows, Android and iOS. In addition to telephony, Instant Messaging is also possible on several platforms.Important: The COMfortel SoftPhone is available licence-free for a limited period of time. For permanent use, please contact your dealer or system partner.

REST API

The REST API makes it possible to call up an set certain parameters or functions of a COMtrexx. Thus, for example, own applications can be used to read in the status of the COMtrexx and its endpoints (telephones, SIP trunks, etc.) and to configure certain functions. Further information is provided here: Auerswald DokuWiki

Improvements

Terminology change

First page in the webinterface renamed:Start->Dashboard

Error messages

If there is no synchronisation between the PBX and the COMtrexx Initialisation Center (CIC), an error message is output.

Varoius explanations of error codes added.

Integrated help

The online help can now be accessed and searched directly in the web interface.

Shorter register intervals

The register interval for COMfortel D-serie phone has been lowered.

Licences

The PBX regularly carries out a comparison of the licences purchased. After purchasing additional licenses, the comparison can also be started.

SIP OPTIONS Keep-Alives

The PBX can now send SIP OPTIONS keep-alives to avoid possible connection losses, e.g. by a firewall. Activate this option in the provider configuration:Exchange lines > Providers and Accounts > Provider > SIP > NAT Keep-Alive

Default settings Provider

The following setting is now disabled by default when creating a provider without a template:Outbound Proxy/Session Border Controller

Storage COMtrexx VM

During the initial setup of a COMtrexx VM, the virtual hard disk is now sufficiently large for storing firmware files, voicemail messages, etc. After updating an existing COMtrexx VM, the virtual hard disk must be increased manually afterwards.. Further information is provided here: Auerswald DokuWiki

Bug Fixes

Licences

Errors/error messages sometimes occured when entering activation licences. To prevent this, a reboot is now performed after initialisation.

Network

The UPNP feature has been removed.

Telephones

Changed CLIP info settings (e.g. date and time) may have had no effect on the analogue phones.

Contacts were not delivered to phones via LDAP if only the company name was entered in addition to the phone number.

After provisioning a D-series phone: Opening the web interface with the user's credentials did not work.

Under certain conditions, D-series phones did not display the correct BLF status.

Telephoning

In certain call scenarios, no dial tone was output for outgoing connections via the provider Vodafone.

When using Call Parking, it was not possible to pick up calls from a parking zone again.

Under certain conditions, incoming call connections had no audio.

Under certain conditions, connections were not terminated after the remote station hung up.

Update

An incorrect version was displayed in the English web interface after an update.

Web interface

Administration > Date and Time > Automatic synchronisation > PBX location: Value was not dispalyed correctly.

Telephones > Status: Filtering by username was not possible.

Administration > Service > Logging > Logging system > Syslog server: With this selection, both logging systems were actice at the same time. Now only the selected log system is active.

User data > Contacts and assignment > CSV export: A superfluous column was exported, which led to problems when reimporting.

Dashboard > Language > Language web interface: the language switch did not work.

Functions > Time control > Configurations > Copy: Under certain conditions, copying did not work.

Telephones > Assignment > New > Adding a device: The dialouge could not be closed under certain conditions.

Voice mail and fax boxes > Functional Overview > Property of the box: The column did not contain any buttons. Now the column is no longer displayed. The function overview is only available for profiles.

• Downloads
• Notes

Known bugs in version 1.6.0

SIP soft clients with manufacturer Auerswald

A previously configured SIP soft client with a manually entered manufacturer Auerswald (e.g. soft client for PBX Call Assist) is automatically displayed as COMfortel SoftPhone after the update. This leads to a change in the display of the registration information. Solution: Rename the manufacturer after the update. Further information is provided here: Auerswald DokuWiki

General information

Privacy statement

Revised information on data protection.

Feature level

Introduction of a feature level in preparation for future firmware versions: If there is a difference between the current feature level of the PBX and the maximum possible feature level, the full range of functions of the PBX cannot be used.

Update/Downgrade

Version 1.4.10 is required for an update to this version. After the update to version 1.4.10, saving a firmware lower than 1.4.10 (downgrade) is no longer possible. If it is necessary, please contact the Auerswald/FONtevo Support service.

After updating an existing COMtrexx VM, the virtual hard disk must be expanded manually afterwards. Further information is provided here: Auerswald DokuWiki

New functions

COMfortel SoftPhone

The PBX supports the COMfortel SoftPhone, a multi-platform client for Windows, Android and iOS. In addition to telephony, Instant Messaging is also possible on several platforms.Important: The COmfortel SoftPhone is available licence-free for a limited period of time. For permanent use, please contact your dealer or system partner.

REST API

The REST API makes it possible to call up an set certain parameters or functions of a COMtrexx. Thus, for example, own applications can be used to read in the status of the COMtrexx and its endpoints (telephones, SIP trunks, etc.) and to configure certain functions. Further information is provided here: Auerswald DokuWiki

Improvements

Terminology change

First page in the webinterface renamed:Start->Dashboard

Error messages

If there is no synchronisation between the PBX and the COMtrexx Initialisation Center (CIC), an error message is output.

Varoius explanations of error codes added.

Integrated help

The online help can now be accessed and searched directly in the web interface.

Shorter register intervals

The register interval for COMfortel D-serie phone has been lowered.

Licences

The PBX regularly carries out a comparison of the licences purchased. After purchasing additional licenses, the comparison can also be started.

SIP OPTIONS Keep-Alives

The PBX can now send SIP OPTIONS keep-alives to avoid possible connection losses, e.g. by a firewall. Activate this option in the provider configuration:Exchange lines > Providers and Accounts > Provider > SIP > NAT Keep-Alive

Default settings Provider

The following setting is now disabled by default when creating a provider without a template:Outbound Proxy/Session Border Controller

Storage COMtrexx VM

During the initial setup of a COMtrexx VM, the virtual hard disk is now sufficiently large for storing firmware files, voicemail messages, etc. After updating an existing COMtrexx VM, the virtual hard disk must be increased manually afterwards.. Further information is provided here: Auerswald DokuWiki

Bug Fixes

Licences

Errors/error messages sometimes occured when entering activation licences. To prevent this, a reboot is now performed after initialisation.

Network

The UPNP feature has been removed.

Telephones

Changed CLIP info settings (e.g. date and time) may have had no effect on the analogue phones.

Contacts were not delivered to phones via LDAP if only the company name was entered in addition to the phone number.

After provisioning a D-series phone: Opening the web interface with the user's credentials did not work.

Under certain conditions, D-series phones did not display the correct BLF status.

Telephoning

In certain call scenarios, no dial tone was output for outgoing connections via the provider Vodafone.

When using Call Parking, it was not possible to pick up calls from a parking zone again.

Under certain conditions, incoming call connections had no audio.

Under certain conditions, connections were not terminated after the remote station hung up.

Update

An incorrect version was displayed in the English web interface after an update.

Web interface

Administration > Date and Time > Automatic synchronisation > PBX location: Value was not dispalyed correctly.

Telephones > Status: Filtering by username was not possible.

Administration > Service > Logging > Logging system > Syslog server: With this selection, both logging systems were actice at the same time. Now only the selected log system is active.

User data > Contacts and assignment > CSV export: A superfluous column was exported, which led to problems when reimporting.

Dashboard > Language > Language web interface: the language switch did not work.

Functions > Time control > Configurations > Copy: Under certain conditions, copying did not work.

Telephones > Assignment > New > Adding a device: The dialouge could not be closed under certain conditions.

Voice mail and fax boxes > Functional Overview > Property of the box: The column did not contain any buttons. Now the column is no longer displayed. The function overview is only available for profiles.

• Downloads
• Notes

General information

Update/Downgrade

This version is required for updates to later versions (greater than 1.4.10).

If you have already updated to version 1.4.7, you will need a special firmware file for the update to version 1.4.10. In this case, please contact the Auerswald/FONtevo Support service vie the HelpDesk.

After the update to version 1.4.10, saving a firmware lower than 1.4.10 (downgrade) is no longer possible. If it is necessary, please contact the Auerswald/FONtevo Support service vie the HelpDesk.

Improvements

Shorter update intervals

Now, setting shorter update intervals under Administration > Maintenance > Update and Restart > Firmware update via update server > Firmware update, regular.

Bug Fixes

PBX management

Occasionally, there could be disruptions during call set up, for example in connection with call forwarding in the exchange line using Call Deflection.

Telephones

External calls to a group could not be accepted on a COMfortel D series phone.

Security

Important security updates

This version includes important security updates. Its use is strongly recommended.

Changes V1.4.7

Improvements

Mutual Authentication (SSL)

The PBX now allows the activation of mutual SSL authentication. This means that not only the PBX checks the registrar's certificate, but the registrar also checks a certificate transmitted by the PBX. Requirement for this is the configuration of two externally generated files in the .pem format: a client certificate and a private key. Provide these files and a passphrase that may belong to the private key in the provider configuration:Exchange lines > Providers and Accounts > Provider > SIP > SIPS > Client certificate/Client key/Client passphrase.

Bug Fixes

PBX management

Changing the assignment of a user to a phone (Roaming User) could influence the group assignment. The user has been logged out for incoming calls.

Licenses

Licenses were charged for analog fax machines without an assigned port. Now, a license is only charged when a module has been configured and a port has been assigned to the fax machine.

Logging

The settings (logger categories) for the logging were not correctly adopted under certain circumstances.

Telephones

Unnecessary information was displayed in the call list of a COMfortel D-series phone. Now, certain information is no longer displayed.

In connection with Vodafone Kabeldeutschland, the call forwarding status on a COMfortel 3600 IP key was not correctly displayed.

Usernames with umlauts led to incorrect display in COMfortel D-series phones.

Under certain circumstances, the transfer of a call on hold with a COMfortel D-series phone failed.

Under certain circumstances, the phone did not display the correct BLF status.

Telephoning

Some calls could not be accepted in some cases when the system was under high load.

On blind transfer (transfer without announcement) the transferring user was disconnected if the call destination could not be reached. Now, the first call partner is reconnected.

There were call disruptions in connection with Telekom Magenta.

Under certain circumstances, the blind transfer (transfer without announcement) failed. The call came back and the phone switched to handsfree.

Web interface

Administration > Contact information > Administrator access > Administrator access > Change admin password: Changing the admin password was not immediately effective.

Administration > Network > IP configuration > MAC address: Here, the MAC address was not correctly displayed (COMtrexx VM only).

Administration > Service > Logging > Logging activated: Switchin off the logging had no effect if the syslog server had been selected as logging system.

Administration > Maintenance > Update and Restart: When updating and restarting via the web interface, a link to an incorrect IP address was displayed. Now, the correct IP address is displayed and the PBX can be reached via the link.

Exchange lines > Exchange line routing > Exchange line routing incoming: When dividing a number block, the linear call distribution was not implemented for all created number blocks. Now, new created number blocks are always implemented with linear call distribution. The remaining number blocks keep their settings. When deleting a number block, you will be asked which number block should be connected to. The settings of the chosen number block are adopted. If required, existing call forwardings are deleted.

Exchange lines > Exchange line routing > Exchange line routing incoming: Changing the call distribution for a phone number failed and led to deleting the phone number from the account settings.

Exchange lines > Exchange line routing > Exchange line routing incoming: Obviously, a call distribution could be configured for a new created empty account. Now, there is a note that phone numbers have to be created for this account first.

Exchange lines > Providers and Accounts > Account > Settings > Miscellaneous > Expert configuration > Call forwarding no reply (CFNR): The keypad/registro codes could not be changed.

Exchange lines > Providers and Accounts: After temporarily switching off, a Telekom account was no longer available.

User data > Call data > External partner: Under certain circumstances the phone number of the external partners was not displayed in the call data list.

External Devices > Fax > Module > No module: This selection was impossible.

External Devices > Fax > Port: Ports were incorrectly displayed.

External Devices > Relays (actuators): The system was not displayed in the relays list.

Functions > Time control > Configurations > Copy: The help link was not working. Now, available helps are linked.

Telephones > Assignment: Filtering after usernames worked only with correct capital and lower-case letters. Now, capital and lower-case letters are ignored.

Telephones > Assignment/Status: The status display of the provisioning file did not match with the assignment.

• Downloads
• Notes

New Features/Bug-Fixes

You find further information about functions or configuration in the Advanced Information/online help. In this chapter, improvements and bug-fixes of this version are described.

Bug-Fixes and Improvements of the Web Interface

Diverse bug-fixes and improvements of the web interface have been made.

Bug-Fixes and Improvements of Provisioning

Diverse bug-fixes and improvements on the provisioning function were made.

Incorrect BLF signalling on Call Forwarding to Groups

On call forwarding to groups, the BLF signalling is now correctly displayed.

Call Data was not displayed with own filter

Call data is now displayed when an own filter has been created and used.