COMfortel® DECT Headset

Product status End-of-Support: Dez. 2023
No further software updates or upgrades

Product status End-of-Service: Dez. 2025
No further technical support

Productstatus End-of-Repair: Dez. 2025
No further repair service

Documentations

LanguagesCurrent version
Statements of conformity V05 PDF
Advanced Information V04 05/2017 PDF
Instructions V05 12/2017 PDF

FAQs

Filter by: Show all General

Lower the listening volume dial and speaking volume dial on the base. For most telephones, the correct setting is position 3.

If the audio level is too low in this position, adjust the headset volume control to increase the headset speaker volume.

If your speaking volume is too low for your listener in this position, adjust the position of the headset to make sure the microphone is as close as possible to your mouth.

Adjust the configuration switch. The most commonly used position is "A", which is the default position.

Lower the speaking volume dial or listening volume dial on the base. For most telephones the correct setting is position 3.

If your desk phone has a volume control, lower until the distortion disappears.

If the distortion is still present, adjust the headset volume control to lower the headset speaker volume. If the distortion persists, lower the listening volume dial on the base.

Make sure there is at least 12 inches between your base and your computer, and 6 inches between your base and your telephone.

Make sure there is at least 12 inches between your base and your computer, and 6 inches between your base and your telephone. You may hear static as your headset is going out of range, move closer to the base.

Make sure your headset is charged.

Make sure your headset is subscribed to base. See manual, Subscribe Your Headset.

Press the call button on your headset.

Adjust the configuration switch on the base until a dial tone is heard.

Fine tune the listening volume on the headset.

If the volume is still too low, adjust the listening volume dial on the base

When you wear the headset, the microphone should rest as close to your cheek as possible without touching. The microphone can be adjusted inward by pivoting the earpiece to optimize the position of the headset. See manual, Position Your Headset.

Move the base further away from your phone.

If the base power supply is plugged into a power strip, plug it into the wall directly

Sales Configurator (SC)

- the easy way to the right system

Customer requirements for communication solutions are constantly increasing and with them the complexity and scalability of ITC systems. Project planning therefore takes up more and more time. Here, the free Sales Configurator offers a simple and fast solution. It gives you the opportunity to efficiently plan communication solutions and create project planning proposals.

Sales Configurator (SC)