FAQ

How do I create an SD card for the COMpact 4000 / COMpact 5000 / COMmander 6000 PBX operating system?

Creating an SD card for the Auerswald PBX operating system from an SD card image in Windows

 

    1. Connect an SDHC card reader to your PC. Wait for the driver to be installed.
    2. Have a 4 GB SDHC card ready. We expressly recommend using a new SDHC card to avoid any hardware problems with the existing card. The card should be a high-quality card for industrial use. We recommend the following brands for this:
      Swissbit, Transcend, Cactus, Apro, Delkin Industrial, ATP
    3. Upload the relevant Auerswald image file to your PC as a ZIP file.

      Here is the download for:



               
 

Licence Information for Firmware PDF Download

 

Open Source Code for GPL, LGPL and other Licences (ISO Image)

  150219 18. 02. 19 Download 3.8 GByte
 

 

  1. Installing the USB Image Tool program

    You need the "USB Image Tool" program from Heise website:

    https://www.heise.de/download/product/usb-image-tool-83646

    Extract the program to a suitable folder on your hard disk (e.g. c:\USBImageTool)
  2. Run the program

    Open the folder and right-click on USB Image Tool.exe and select "Run as administrator". Select "Device Mode" at the top left. Insert the 4GB SDHC card in the card reader and click Rescan

    USB Image Tool


    Select the card reader:


    card reader

     

    Now click Restore:


    Restore

    Select the previously saved image file and click Open:

    √Ėffnen

    Confirm the following dialogue with Yes:

    Ja

    The image will now be written to the SD card. Wait until the green progress bar reaches 100%.

    100%

    Remove the SD card. Switch the write-protect switch on the SD card to the lock position: Lock

    Lock

    You can now use the card in the PBX.

Clever Ideas