SG-100 / SG-200

  • surge protector SG-100 / SG-200 | Auerswald
  • surge protector SG-100 / SG-200 | Auerswald
  • surge protector SG-100 / SG-200 | Auerswald

SG-100 / SG-200

Overvoltage protection modules for effective protection against power surges for All-IP and traditional telecommunications connections.

  • Perfectly secured telecommunications infrastructure
  • Plug and play – commissioning made as quick and easy as possible
  • Full performance – bandwidths guaranteed
  • No productivity hits when Internet access fails

Use the modules in the SG series to can protect your router or a remote end device on your ITC infrastructure against power surges from the communications network. The SG-100 is the best choice for use on ADSL connections with splitters, ISDN or remote exchange line connections, remote analogue extensions, remote UP0 extensions or analogue door terminals. The SG-200 is designed for use on AllIP connections such as VDSL or ADSL without splitters.

Decision Suppor SG100 SG200 en
 
  • Suitable for use on an:
    • ADSL connection with splitter
    • ISDN exchange line connection
    • analogue exchange line connection
    • remote analogue or UP0 extension or analogue door terminal
    • ADSL and VDSL connections with bandwidth reduced, but above minimum guaranteed access line speed.
  • Suitable for use on All-IP connections:
    • VDSL connections
    • Suitable for VDSL 100
    • ADSL connections without splitters
General  
Usable in compliance with country-specific requirements: across Europe
Ambient temperature in operation: -5 to +40 ºC
Ambient temperature in storage: --40 to +70 ºC
Relative humidity in operation: 5 % to 95 %, noncondensing
Mounting type: wall mounting
Protection class: IP20
Casing: plastic (fire-proof), black
Dimensions: 142 mm x 81 mm x 27 mm
Weight: 106 g (SG-100), 111 g (SG-200)
Safety: CE
SG-100  
Surge arrester class: Type 2P1
Rated voltage (UN): 70 V AC / 100 V DC
Highest continuous voltage (UC): 85 V AC / 120 V DC
Rated current at 45 °C (IL): <= 200 mA
Total C2 rated discharge surge current 5 kV (8/20 μs) (In): 5 kA
C2 rated discharge surge current 5 kV (8/20 μs) per core (In): <= 2,5 kA (operation with wire terminal)
<= 2 kA (operation via RJ45 socket)
Protective level, core-core at C2 (UP): <= 130 V
Protective level, core-core at C2 (UP): <= 230 V
Serial impedance per core (0 to 30 MHz): 2,4 Ω +-20%
Cut-off frequency, core-core (100 Ω) (fG): 0 to 100 MHz
Capacity, core-core (C): <= 10 pF
Capacity, core-PG (C): <= 10 pF
Pulse reset time: <= 160 ms
Overload failure mode: Mode 3 (disconnect line)
SG-200  
Surge arrester class: Type 2P1
Rated voltage (UN): 20 V AC
Highest continuous voltage (UC): 28 V AC / -- DC
Highest continuous voltage (IL): <= 60 mA
Total C2 rated discharge surge current 5 kV (8/20 μs) (In): 5 kA
C2 rated discharge surge current 5 kV (8/20 μs) per core (In): <= 2,5 kA (Betrieb mit Drahtklemme)
<= 2 kA (Betrieb über RJ45-Buchse)
Protective level, core-core at C2 (UP): <= 45 V
Protective level, core-PG at C2 (UP): <= 230 V
Serial impedance per core (0 to 30 MHz): 3,8 Ω resisitiv +-20% + 100 nF kapazitiv
Cut-off frequency, core-core (100 Ω) (fG): 35 kHz bis 80 MHz
Capacity, core-core (C): <= 15 pF
Capacity, core-PG (C): <= 10 pF
Capacity, core-PG: <= 160 ms
Overload failure mode: Mode 3 (disconnect line)

Keine Produktabbildung

Data sheet SG-100 / SG-200

2 pages - PDF

English

Produktabbildung
Dokumentation