UP0/S0 Adapter

  • UP0/S0 Adapter | Auerswald

PoE Injector

  • PoE Injector | Auerswald

UP0/S0 Adapter

ISDN cabling the easy way

With the UP0/S0 Adapter ISDN telephones with 4-wire S0 interface can be connected to an internal 2-wire ISDN Bus system of a PBX system. The complex installation of a 4-wire ISDN bus system from the PBX to all the telephones is not necessary as the wiring to the telephones is realised with a 2-wire point-to-point connection. At the endpoint of the wiring the adapter will simply be installed between the wiring and the telephones.

Up to two S0 terminals can be connected via the RJ-45 Western plugs. On the UP0 side a terminal block is available additionally to the RJ-11 Western plug for a fixed installation.

The adapter is a really universal talent: It is not only compatible to all Auerswald ICT systems with internal UP0 ports but to several systems of other vendors as well. On the S0 side all Auerswald system telephones are suitable for connection - as a matter of fact with the usual system functionality. And ISDN devices of other manufacturer can be used with standard ISDN functionality. 

Hint: With this adapter you can continue to use your existing cabeling for older analogue telephones. A new installation is not necessary in that case. In addition you can realise a cable length of up to 1,000 meters whereas the 4-wire bus system is limited to 150 meters. 

  • Adapter for the connection to a 2-wire UP0 port, conversion to 4-wire S0 interface
  • 1 internal S0 port with 2 plugs for 2 system telephones or ISDN terminals
  • Power supply via the UP0 port
  • Installation using Western plug connections, fixed installation using terminal block possible
  • LEDs for the display of the operation status
  • Operation as desk or wall unit
UP0 port for the connection to the UP0 port of the ICT system
S0 port or the connection of 1 or 2 ISDN/S0 terminals
Technical data  
Operation voltage out of the UP0 port of the ICT system
Range UP0 port approx. 1,000 m at Ø 0,6 mm
S0 port point-to-multipoint (PTPM, Euro-ISDN, DSS-1)
Range S0 port approx. 150 m
Housing plastic, 2 parts
Dimensions ø 95 mm x 33 mm
Weight approx. 100 g
Safety CE
Clever Ideas